SATIN (REPLACES FILASATIN)

PROTECTIVE WAX WITH SATIN EFFECT

WHAT IT IS FOR

  • Ideal as a finishing and maintenance product.
  • Protects interior terracotta, extruded stoneware and rustic natural stone floors against traffic wear and dirt, softening the texture, facilitating maintenance and imparting a satin finish.
  • Recommended for treating interior surfaces of slate, hydraulic mosaic and artificial stone.
  • Ideal for the maintenance of marble and natural stone with honed and honed finish.

ADVANTAGES

  • IT IS SELF-POLISHING, BUT IF YOU WANT TO INCREASE THE DEGREE OF BRIGHTNESS, IT IS POSSIBLE TO POLISH BY RUBBING WITH A MOP OR CLOTH.
  • THREE FUNCTIONS: PROTECTS, MAINTAINS AND ENNOBLES THE FLOORS.
  • PROVIDES A NEW AND ORIGINAL SATIN EFFECT.
  • HIGH CONCENTRATION: CAN BE USED BOTH PURE (IN THE TREATMENT PHASE) AND DILUTED IN WATER (IN THE MAINTENANCE PHASE).
  • COMPLETELY REMOVABLE.
  • HIGH SELF-LEVELING POWER AND GREAT ADHESION CAPACITY.

IDEAL FOR

  • Clay
  • Extruded stoneware
  • Unpolished Natural Stone and Terrazzo
  • Hydraulic Mosaic

INSTRUCTIONS FOR USE

Dilution: It can be used pure or diluted in water as needed.

With a clean and dry surface, apply a coat of SATIN with a brush, cloth or other similar applicator in a uniform way. Wait until completely dry (at least 1 hour) and apply a second coat. Wait for complete drying before driving. If a higher level of shine is desired, it is sufficient to polish the surface with a mop or wool cloth.

For maintenance: Renew the shine (e.g. every 2–3 months): With clean and dry surface apply SATIN diluted in water in a ratio of 1:10 (500 ml. in 5 liters of water) with a cloth or other similar applicator. To restore the protection (e.g. once a year): Apply neat with a cloth, fleece or other applicator. Wait 1 hour and polish with a dry surface.

ATTENTION, do not use on exterior surfaces and in humid environments (e.g. showers).

PERFORMANCE

With one liter of product can be treated:

  • Mud30 m2
  • Stone30/40 m2