Description

Uses

Waterproofing additive for plasters, renders and bedding mortars in:

  • Swimming pools, tanks, water treatment plants and canals.
  • Facades, walls, basements.
  • Waterproofing additive for prepared dry mortars.

To make waterproof mortars or concretes for “dry” spraying in: Tunnels and galleries:

  • Tunnels and galleries.
  • Excavations, slope stabilization.
  • Supporting walls.
  • Swimming pools, tanks, canals.
  • Concrete repair, etc.

Advantages

It reacts with cement during the hydration process, giving rise to mineral substances that clog the capillary network, thus providing high impermeability to the mortar or concrete. In addition:

  • Improved workability without increasing the mixing water.
  • Facilitates upward projection.
  • Reduces rejection.
  • It is chloride free.

Packaging

2 kg plastic bags and 18 kg bags.

Color

Off-white powder

DOSAGE

Super Sikalite® should be mixed with the dry cement, then adding the sand and water necessary for mixing. The sand should preferably be river sand, clean and sieved, with a maximum recommended size of 2.5 mm. The cement/sand volume ratio will be 1/3 maximum.

Watertight plasters:

At least 2 coats of additive mortar shall be applied with a total thickness of 2 to 3 cm. The composition of the mortar shall be as indicated above. The surface finish will be a fine troweling, it is advisable not to burnish.